Valve and Control Settings in Industrial Hydraulics
Objectives
At the end of the course, trainees will be able to:
- Read a hydraulic diagram.
- Understand how a complete hydraulic system works.
- Hydraulically lock out a hydraulic installation.
Program
1. HY3 SAFETY: IDENTIFY THE SAFETY POINTS FOR INTERVENTION BY ANALYSING THE DIAGRAM (LOCKOUT MANAGER)
- Lockout – Removal of lockout.
2. SYSTEM CONCEPT
- Open circuit – Closed circuit.
3. HYDRAULIC GENERATION
- Electrical power not required: Constant pressure and remote constant pressure control – Constant pressure and flow control (Load-Sensing).
- Electrical power required: Constant power control.
4. DISTRIBUTION
- Symbolisation variant.
5. FLOW AND PRESSURE VALVES
- Speed: Simultaneous movements – Synchronisation.
- Effort: Blockage – Drive loads.
6. RECEIVERS
- Cylinders: Single-acting – Double-acting – Rotary.
- High-speed motors with mechanical gearbox – Low-speed direct drive motors.
7. READING DIAGRAMS
- Methodology.
- Identification of symbols and circuits.
- Analysis of the machine’s operating phases.
- Interpretation of pressures and flows.
Trainees must bring: Hydraulic diagrams of their machines
Teaching Methods & Aids
Feedback – Case studies – Role-play scenarios – Interactive assessment.
Specific IFC TRITECH leaflet.
Certificates provided
- Certificate of attendance
- HY3 clearance level certificate
Practical information
Sessions
| Location | Dates | ||
|---|---|---|---|
| TOURS | From 12 May 2025 to 16 May 2025 | Pre-registration | |
| ROANNE | From 23 June 2025 to 27 June 2025 | Pre-registration | |
| TOURS | From 08 September 2025 to 12 September 2025 | Pre-registration | |
| ROANNE | From 24 November 2025 to 28 November 2025 | Pre-registration |
Recommandation
of principals would recommend IFC TRITECH as a training organization.
Quality
This is the percentage of satisfaction obtained after consulting all 2023 trainees on the quality of our training courses.
Pedagogy
This is the score obtained by IFC TRITECH when participants were asked about the suitability of teaching resources for their inter-company training.
Our testimony
We call on IFC TRITECH for training in electricity and hydraulics, so that our technicians can develop their skills in an agile way. IFC TRITECH also provides us with tailor-made training on our runway equipment, which incorporates specific and complex technologies, both in its training centres and on our premises.
All these factors have made IFC TRITECH the preferred training organisation for Air France's ramp equipment division for over 20 years!
For more than 10 years, we have trusted the IFC TRITECH group with our training needs. Their skilled trainers are passionate about their work, which is reflected in the quality of their training courses. Thanks to them, our Loxam technicians develop their knowledge and performance in the field.
For over 20 years, IFC and TRITECH have been the benchmark in the field of hydraulics and lubrication training.
I have met passionate trainers who have enabled me to develop my skills in these areas.
Together with them, we have developed training courses for my employees in the maintenance of unique and complex tools.
Contact
Would you like to take a training course? Contact us, we're here to help!