LV licence If you are interested in a refresher course, please contact us.
Objectives
At the end of the course, trainees will be able to:
- Use a mowing/brush-cutting kit on slope tractors.
- Master safe driving.
- Performing 1st level servicing and maintenance.
Program
1. DEFINITIONS AND BASIC CONCEPTS
- Mowing and brush-cutting
- Knowledge of the vegetation, the environment and the terrain.
- Soil type, bearing capacity, adhesion.
2. OVERVIEW OF DIFFERENT CUTTING EQUIPMENT
- Front mowers or shredders – Flails – Direction and speed of rotation – Cutting height.
- Dangers and protection.
3. SLOPE TRACTOR DEFINITION
- Lift fixed to the rear of the front axle.
- Low centre of gravity.
- Load transfer.
- Lateral offset of the front tool.
- Steering systems (2W, 4W + Crab).
- Tyre adaptation.
- Inflation.
- Mechanical and hydrostatic transmissions.
4. STAFF AND USER SAFETY
- Responsibilities.
- Gestures and postures.
- Appropriate clothing and personal protection.
- Signage.
- Rules for safe driving.
5. ENVIRONMENT
- Site survey (percentage of slope).
- Nature of the terrain – Soil – Obstacles.
- Weather conditions.
- Beaconing.
- Safety distances.
- Escape, cleanliness.
- Respect for the environment.
- Economic and ecological factors.
6. 1ST LEVEL CHECKS AND MAINTENANCE
- Analysis of manufacturers’ documents: User manual – Maintenance booklet – Follow-up sheets.
- Checking and displaying equipment in the workshop: Tractor / forwarder check – Levels – Tyre condition – Inflating / Balancing – Lighting – Tool carrier check – Relief systems – Steering system – Braking – Cutting tool check – Condition of mud flaps – Safety device.
- Maintenance: Awareness of the cost of investment and maintenance – Preventive maintenance – Lubrication – Cleaning – Wear parts – 1st level servicing.
7. GETTING STARTED
- Specificity of forwarder.
- Location of the main components.
- Adjusting the driving position.
- Fixings and settings.
- Reclining seat, seat belt.
- Transport and travel.
- Steering modes.
- Load shedding.
8. OPERATING DEMONSTRATION BY THE TRAINER
9. EXERCISES ON EQUIPMENT PROVIDED
- Application: Rules to be observed on the slope.
- Driving exercises on equipment: Ditches – Embankments – Slopes – Passing obstacles – Turning on a slope.
- Mowing / Clearing undergrowth.
- Cleaning and maintenance of equipment.
10. SUMMARY
- Questions and answers.
- Refresher on safety rules.
- Validation of prior learning.
ESSENTIAL: Trainees must bring:
OVERALLS
SAFETY FOOTWEAR
This training course may give rise to an assessment enabling the company to issue a driving licence.
Teaching Methods & Aids
Feedback – Case studies – Role-play scenarios – Interactive assessment.
Specific IFC TRITECH leaflet.
Certificates provided
- Certificate of attendance
Practical information
INTRA price contact us
Recommandation
of principals would recommend IFC TRITECH as a training organization.
Quality
This is the percentage of satisfaction obtained after consulting all 2023 trainees on the quality of our training courses.
Pedagogy
This is the score obtained by IFC TRITECH when participants were asked about the suitability of teaching resources for their inter-company training.
Our testimony
We call on IFC TRITECH for training in electricity and hydraulics, so that our technicians can develop their skills in an agile way. IFC TRITECH also provides us with tailor-made training on our runway equipment, which incorporates specific and complex technologies, both in its training centres and on our premises.
All these factors have made IFC TRITECH the preferred training organisation for Air France's ramp equipment division for over 20 years!
For more than 10 years, we have trusted the IFC TRITECH group with our training needs. Their skilled trainers are passionate about their work, which is reflected in the quality of their training courses. Thanks to them, our Loxam technicians develop their knowledge and performance in the field.
For over 20 years, IFC and TRITECH have been the benchmark in the field of hydraulics and lubrication training.
I have met passionate trainers who have enabled me to develop my skills in these areas.
Together with them, we have developed training courses for my employees in the maintenance of unique and complex tools.
Contact
Would you like to take a training course? Contact us, we're here to help!