Mobile hydraulics technology
Objectives
At the end of the course, trainees will be able to:
- Analyse the hydraulic risks associated with the project.
- Prepare and carry out preventive maintenance.
- Check and adjust pressure and flow valves.
Program
1. HY2 SAFETY: INTERVENTIONS ON MACHINES / INSTALLATIONS THAT ARE NOT LOCKED OUT
- Performance control – Adjustment – Sampling.
- Sub-assembly exchange (Directional control valves – Hydraulic power unit, etc.).
- Separation – Tagout.
2. CHECKING AND ADJUSTING PRESSURE AND FLOW DEVICES
- Choice of measurement points.
- Use of measuring equipment: Pressure gauge – Flow meter – Thermometer.
- Adjustment procedures.
- Mistakes to avoid.
- Frequency of checks.
3. BUILDING CIRCUITS ON POWER SIMULATORS
- Checking pumps and motors (efficiency).
- Checking cylinders (leaks).
- Diagram analysis – Circuit connection – Start-up – Settings – Study of operating phases.
- Checks and adjustments on circuits with fixed displacement pumps: Cylinder control (resisting or driving loads)
- Motor control – Flow regulator and divider – 6/3 directional control valve and load-sensing open centre – Basic closed circuit.
4. AWARENESS OF CLEANLINESS DURING INTERVENTIONS
- Pollution: Origins and types.
- Filtration: Filter positioning (ISO 4413).
- Fluids: Characteristics – Classification of oils.
- Type of alterations.
5. BASIC PRINCIPLES OF HOSES AND CONNECTIONS
- Flanges: Types – choice.
- Hoses: Characteristics – Choice – Fluid accounting – Service life – Brand.
6. DESTRUCTIVE PHENOMENA
- Temperature – Cavitation – Wear mechanics.
ESSENTIAL: Trainees must bring: PPE
Teaching Methods & Aids
Feedback – Case studies – Role-play scenarios – Interactive assessment – Simulation bench demonstrations.
Specific IFC TRITECH leaflet.
Simulation training bench.
Certificates provided
- Certificate of attendance
- HY2 clearance level certificate
Practical information
Sessions
| Location | Dates | ||
|---|---|---|---|
| ROANNE | From 13 October 2025 to 17 October 2025 | Ended | |
| ROANNE | From 24 November 2025 to 28 November 2025 | Pre-registration | |
| ROANNE | From 30 March 2026 to 03 April 2026 | Pre-registration | |
| ROANNE | From 08 June 2026 to 12 June 2026 | Pre-registration | |
| ROANNE | From 12 October 2026 to 16 October 2026 | Pre-registration |
Recommandation
of principals would recommend IFC TRITECH as a training organization.
Quality
This is the percentage of satisfaction obtained after consulting all 2023 trainees on the quality of our training courses.
Pedagogy
This is the score obtained by IFC TRITECH when participants were asked about the suitability of teaching resources for their inter-company training.
Our testimony
We call on IFC TRITECH for training in electricity and hydraulics, so that our technicians can develop their skills in an agile way. IFC TRITECH also provides us with tailor-made training on our runway equipment, which incorporates specific and complex technologies, both in its training centres and on our premises.
All these factors have made IFC TRITECH the preferred training organisation for Air France's ramp equipment division for over 20 years!
For more than 10 years, we have trusted the IFC TRITECH group with our training needs. Their skilled trainers are passionate about their work, which is reflected in the quality of their training courses. Thanks to them, our Loxam technicians develop their knowledge and performance in the field.
For over 20 years, IFC and TRITECH have been the benchmark in the field of hydraulics and lubrication training.
I have met passionate trainers who have enabled me to develop my skills in these areas.
Together with them, we have developed training courses for my employees in the maintenance of unique and complex tools.
Contact
Would you like to take a training course? Contact us, we're here to help!